| Modification card for: Linotype 730 Herkules conv/interf | Part No. : 135110 |
Print Date: 12-03-02
| Date | Lev. | + |
Description |
| 1/7-93 | 1 |
1st. Conveyor sent to Linotype for test. | |
| 15/9-93 | 2 |
+ |
All sensors, motors and conv. Cable connected to conv. PCB located at conv. Bottom.Conv.connected to earth. |
| 30/11-93 | 3 |
+ |
Foam (disk) rollers not ground. Angel near gassprings introduced to strengthene con.case. |
| 10/03-94 | 4 |
+ |
Gas spring brackets for conv. lid, raised 1.5mm higher up. |
| 1/12-94 | 5 |
+ |
Snaplocks 135036 & 135037 mounted on conv. Lid. |
| 20/1-98 | 6 |
+ |
New Heidelberg design lid. Front edge approx. 14.5 mm high. |