| Modification
card
for: Purup-Eskofot Merkur online black Alu gray 7047 GL 291 Maestro GL 290 Maestro GL 291 Maestro NP GL 291 Merkur diverter |
Part No.: 161196 161198 161274 161275 161277 161278 |
Print Date: 12-03-02
| Date | Lev. | + |
Description |
| 22/05-96 | 1 |
1st mc: has the same first 25 mod. Levels as mc: no.161192. Has a low base. | |
| 02/07-96 | 2 |
New drive motor nr. 217219. | |
| 24/06-96 | 3 |
Oscillator pumps 66167 altered from PTI to Gormann-Rupp without a diode. | |
| 12/09-96 | 4 |
Transformer with 208/230V primary inlet. USA and Korea must be connected to 208V. | |
| 21/11-96 | 5 |
Spal pumps replaced by IWAKI MD 20R-N | |
| 10/12-96 | 6 |
Dev, Fix & Water racks have 14 PVC rollers 129223 each. | |
| 16/06-97 | 7 |
Exhaust blower 70148 altered to a larger blue blower 65154 | |
| 18/12-97 | 8 |
Voltage stabilizer on CPU board altered to type LA940V5. | |
| 01/10-97 | 9 |
Metal plates altered
to grey ral 7047. Mc: with metal plates product no:161198. |
|
| 16/02-98 | 10 |
+ |
Suction canal 217006 mounted near dev section to stop fumes from entering the plotter. |
| 05/03-98 | 11 |
+ |
Diode mounted on CPU board. |
| 30/03-98 | 12 |
Repl. pumps mounted with springs. | |
| 30/03-98 | 13 |
Motor changed to 217216.Drive gear wheel mounted with new six sided (217305) cast hub using a wedge on the drive motor. | |
| 30/03-98 | 14 |
New blowers mounted in dry section. | |
| 29/07-98 | 15 |
New outlet guide no.129183. | |
| 10/01-98 | 16 |
New switch-box (217148) with automatic fuse mounted. | |
| 10/01-98 | 17 |
New drive motor 217209 with needle bearings. | |
| 10/11-98 | 18 |
New 32T gear wheel in dry rack. | |
| 05/01-99 | 19 |
Edge strip 7105 mounted in dry inlet | |
| 19/04-99 | 20 |
Colour altered to a
shade of grey. RAL 7016. Base colour altered RAL 9006 ( silver shade) |
|
| 22/04-99 | 21 |
+ |
Edge strip altered prior to mounting, on the bottom in dry inlet. |
| 99/11-10 |
22 |
+ |
Lower rubber lip at Dry inlet fixed with rivets |