| Modification card for: Futuro on-Line, R44 COMBI | Part No.: 161220 |
Print Date: 12-03-02
| Date | Lev. | + |
Description |
| 23-06-97 | 1 |
1st
machine has the same 8 first levels as 161292 |
|
| 23-09-97 | 2 | + | Alterations
made on Upper and Lower X guides. Crossover guides Act stab and wash2 lowered 4mm. Lids in wet section painted black inside. |
| 28-10-97 | 3 | + |
Guide
324754 altered to metal. |
| 21-11-97 | 4 | + | Guide 324754 altered to plastic. |
| 21-11-97 | 5 | Upper guide 324714 altered to plastic. | |
| 21-11-97 | 6 |
Lower
guide in cross over altered to plastic 324716. |
|
| 21-11-97 | 7 |
Gear
wheel mounted on upper inlet roller in Dev 1 rack. |
|
| 21-11-97 | 8 | Metal covering plates. | |
| 30-03-98 | 9 | Springs used to hang repl. Pumps. | |
| 30-03-98 | 10 | New Fantech blowers with plastic wings in dry section. | |
| 18-06-98 | 11 | + |
New
Activator rack with 5 rollers and guide in bottom |
| 10-01-98 | 12 |
New
switch-box (217148) with automatic fuse mounted. |
|
| 10-01-98 | 13 | + | New motot(217209) with needle bearings in gear box. |
| 10-11-98 | 14 | + |
New
32T gear wheel in dry rack. |
| 05-01-99 | 15 | Edge strip (7105) mounted in dry inlet. | |
| 12-03-99 | 16 |
Speed
PCB with jumper to disengage creep speed. |
|
| 24-04-99 | 17 | + | Edge strip altered prior to mounting, on the bottom in dry inlet. |
| 10/11-99 | 18 | + | Lower rubber lip at Dry inlet fixed with rivets |
| 09-02-00 | 19 | Wireing changed. Dryer blowers 136711, 136712 connected directly to relay PCB. Cable 217609 directly from relay PCB to pump support. Replenishment pumps in left side of machine | |
| 19-04-00 | 20 | + | Upper inlet roller for plate in Fix 1 rack 1” PU |