| Modificationcard for: GL 361 F.ONLINE Herkules | Part No. : 161362 |
Print Date: 12-03-02
| Date | Lev. | + |
Description |
| 01/07-93 | 01st mc. has the same first 6 mod levels as 161361. | ||
| 15/08-93 | 1 |
+ |
Mounted with film transport control PCB, UL sensor & vacum alarm. |
| 01/11-93 | 2 |
+ |
Ring type springs
(217334) in sted of type (65273) mounted on the rollers near the horizontal holes in Dev
Fix & wash racks. Springs on inlet rollers in Fix & Wash racks removed |
| 01/12-93 | 3 |
New temp. PCB 217097 | |
| 20/01-94 | 4 |
Dev Fix & wash with 14 (136163) smooth PU rollers in sted of (61131) PU rollers. | |
| 25/02-94 | 5 |
+ |
Film transport PCB altered. |
| 01/06-94 | 6 |
Heating elements altered from 66606/66605 to 68545/68544.Seperate neutral wire connection to blowers in dry section. | |
| 07/01-94 | 7 |
New transformer 911241 4A with thermo fuse. | |
| 17/08-94 | 8 |
D4 mounted on relay PCB so as circ. pumps constantly on in operate and stand by, but not in night. | |
| 11/10-94 | 9 |
No feed function altered to No feed light also on in on-line mode. | |
| 14/09-95 | 10 |
+ |
Process PCD altered. |
| 14/09-95 | 11 |
Smooth rollers
(136361) used in wet racks. No nylon rollers used in wet racks . 1" rollers in crossover. |
|
| 18/09-95 | 12 |
Asdjustabel receiving basket. | |
| 06/12-95 | 13 |
Dev rack with PP+PA12 gear wheels. | |
| 30/01-96 | 14 |
+(USA) |
Fire proof PVC plate (217042) behind relay PCB. |
| 30/01-96 | 15 |
XY condersator mounted near motor and earthed to ground via the middel leg. | |
| 270/3-96 | 16 |
+ |
Bottom plates
fastened with 6x50 bolts + star locks. Back plate fastened with three extra screws near film out-let. |
| 24/06-96 | 17 |
Repl.pumps (66167)
altered from PTI to Gormann-rupp without diodes + earth wire mounted. |
|
| 02/07-96 | 18 |
New motor 217217. ELVI with a blank housing. | |
| 15/04-97 | 20 |
New speed PCB with creep speed. 911937 | |
| 03/09-97 | 21 |
Metal covering plates. | |
| 21/11-97 | 22 |
Massive steel rollers (136544) in Dev, Fix and Wash racks. |
| 10/01-98 | 23 |
+ |
New switch-box (217148) with automatic fuse mounted. |
| 10/01-98 | 24 |
New motot(217209) with needle bearings in gear box. | |
| 29/10-98 | 25 |
New tanks (for 5/8" hoses) mounted with fixation angles in tank . Cooler pipe in water tank. | |
| 10/11-98 | 26 |
New 32T gear wheel 275155 in dry rack. | |
| 16/11-98 | 27 |
New Dev rack 136908 New fix rack 136438. |
|
| 05/01-99 | 28 |
+ |
Edge strip (7105) mounted in dry inlet. |
| 12/03-99 | 29 |
Speed PCB with jumper to disengage creep speed. | |
| 22/04-99 | 30 |
+ |
Edge strip altered prior to mounting, on the bottom in dry inlet. |
| 991110 | 31 |
+ |
Lower rubber lip at Dry inlet fixed with rivets |
| 991221 | 32 |
Motherboard 454578 Process PCB 911889 filmtransport PCB 129079 feed sensor 890555 film switch PCB 129078 outlet switch 6095 cableset do 890628 |
|
| 09-02-00 | 33 |
Wirering changed. Dryer blowers 136711, 136712 connected directly to relay PCB. Cable 217609 directly from relay PCB to pump support. Replenishment pumps in left side of machine |