| Modification card for: GL 541 | Part No. : 165555 |
Print Date: 12-03-02
| Date | Lev. | + |
Description |
| 01/10-91 | 1 |
Ist mc. has the same
first 25 mod. Levels as 541. Mounted with MPC control box and software 502C. |
|
| 06/08-91 | 2 |
Software altered to FP 503 | |
| 01/01-92 | 3 |
+ |
New dry rack. |
| 01/01-92 | 4 |
New repl. Pumps. | |
| 01/10-92 | 5 |
Colour altered to white . | |
| 01/05-93 | 6 |
New drive motor.Motor frequency altered. | |
| 01/03-93 | 7 | New PU 1x54" rollers. ( not ground ) | |
| 11/01-93 | 8 |
+ |
Ring type springs (217334) in sted of type (65273) mounted on the rollers in Dev Fix & wash racks. |
| 01/06-94 | 9 |
Heating elements altered from 66606/66605 to 68545/68544.Seperate neutral wire connection to blowers in dry section. | |
| 18/09-95 | 10 |
Asdjustabel receiving
basket Main switch box altered to 217149. |
|
| 30/01-96 | 11 |
XY condersator mounted near motor and earthed to ground via the middel leg. | |
| 20/02-96 | 12 |
UL sensor in outlet removed. | |
| 15/03-96 | 13 |
IR feed sensor mounted. | |
| 21/03-96 | 14 |
Mains connection on relay PCB altered. | |
| 27/03-96 | 15 |
+ |
Bottom plates
fastened with 6x50 bolts + star locks. Back plate fastened with three extra screws near film out-let. |
| 17/04-96 | 16 |
+ |
Dev end plate mounted with angle. |
| 13/06-96 | 17 |
+ |
Dry rack mounted with ground rollers. |
| 24/06-96 | 18 |
Repl.pumps (66167) altered from PTI to Gormann-rupp without diodes + earth wire mounted | |
| 02/07-96 | 19 |
New motor 217217. ELVI with a blank housing. | |
| 12/09-96 | 20 |
||
| 21/11-96 | 21 |
Spal circ.pumps replaced by IWAKI MD 20R-N | |
| 09/12-96 | 22 |
Dry rack altered to ALU. Rollers | |
| 20/11-97 | 23 |
Dry rollers altered to smooth ALU. Gearing factor altered. | |
| 26/11-97 | 24 |
+ |
Fix spray bar as standard. |
| 08/12-97 | 25 |
+ |
Interface cable altered rfom 155098 to 136098. |
| 18/12-97 | 26 |
+ |
Voltage stabilizer on CPU board altered to type LA940V5. |
| 12/01-98 | 27 |
Bottom rollers altered to massive steel 155536. | |
| 12/01-98 | 28 |
Light lock 155783 raised | |
| 05/03-98 | 29 |
+ |
Diode mounted on CPU board. |
| 30/03-98 | 30 |
Springs used to hang repl. pumps. | |
| 30/03-98 | 31 |
Motor changed to 217216.Drive gear wheel mounted with new six sided (217305) cast hub using a wedge on the drive motor. | |
| 30/03-98 | 32 |
New Fantech blowers with plastic wings in dry section. | |
| 28/05-98 | 33 |
+ |
Spray bar angle can be adjusted. |
| 10/01-98 | 34 |
+ |
New switch-box (217148) with automatic fuse mounted. |
| 10/01-98 | 35 |
New motot(217209) with needle bearings in gear box. | |
| 10/11-98 | 36 |
New 32T gear wheel in dry rack. | |
| 18/11-98 | 37 |
Unitrack rack in dev. Fix rack altered. Fix spray removed. | |
| 05/01-99 | 38 |
Edge strip (7105) mounted in dry inlet. | |
| 15/03-99 | 39 |
+ |
Inlet rollers in dry rack altered. |
| 22/04-99 | 40 |
+ |
Edge strip altered prior to mounting, on the bottom in dry inlet. |
| 17/05-99 | 41 |
Steel rollers in Fix & wash racks | |
| 15/06-99 | 42 |
New tanks 155610 Dev, 155612 Water, 155613 fix Circulation hoses 5/8" both dev and fix heating element is now 66107. | |
| 17/06-99 | 43 |
Covering plates in Sheet metal color RAL 7047 | |
| 20/08/99 | 44 |
+ |
Lower input roller 155294 in Dev. rack changed to rubber to obtain more even pull in film |
| 10/11-99 | 31 |
+ |
Lower rubber lip at Dry inlet fixed with rivets |
| 6/12-99 | 32 |
Exhaust blower 70167, capacitor 29003 | |
| 28/05-98 | 33 | + | Spray bar angle can be adjusted. |
| 10-01-98 | 34 | + | New switch-box (217148) with automatic fuse mounted. |
| 10/01-98 | 35 | New motot(217209) with needle bearings in gear box. | |
| 10-11-98 | 36 |
New 32T gear wheel in dry rack. |
|
| 18/11-98 | 37 |
Unitrack rack in dev. |
|
| 05/01-99 | 38 |
Edge strip (7105) mounted in dry inlet. |
|
| 22/04-99 | 39 | + |
Inlet rollers in dry rack altered. |
| 15/03-99 | 40 | + | Edge strip altered prior to mounting, on the bottom in dry inlet. |
| 17/05-99 | 41 | Steel rollers in Fix & wash racks | |
| 15-06-99 | 42 | New tanks 155610 Dev, 155612 Water, 155613 fix Circulation hoses 5/8” both dev and fix heating element is now 66107. | |
| 17/06-99 | 43 | Covering plates in Sheet metal color RAL 7047 | |
| 20-08-99 | 44 | + | Lower input roller 155294 in Dev. rack changed to rubber to obtain more even pull in film |
| 10/11-99 | 45 | + | Lower rubber lip at Dry inlet fixed with rivets |
| 06-12-99 | 46 | Exhaust blower 70167, capacitor 29003 | |
| 29-05-00 | 47 | Wireing changed. Dryer blowers xxx711, xxx712 connected directly to relay PCB. Cable 217609 directly from relay PCB to pump support. Replenishment pumps in left side of machine | |
| 21/12-01 | 48 | Dry rack: 25.0mm ALU roller 155474 with PVC endpieces using drive axele 80/25 is replaced by 25.4mm ALU roller 155275 using drive axle 79/24 gearwheels |