| Modificationcard for: GL17/ML43 | Part No. : 430000 GL17/ GLP17 430003 GL 17 f. online 430004 GL 17 X-Ray |
Print Date: 12-03-02
| DATE | Lev. | + |
Description |
| 12/05-92 | 1 |
Blower altered to 430109 and 430119 | |
| 12/05-92 | 2 |
Realy PCB ,mother board and panel PCB altered. | |
| 01/06-92 | 3 |
Light lock mounted on front plate. | |
| 20/06-92 | 4 |
Lid on Dev and Fix tanks. | |
| 20/06-92 | 5 |
Light lock angle mounted in cassette. | |
| 01/07-92 | 6 |
Panel box on line type. | |
| 01/07-92 | 7 |
Drive belt altered to type 150XL ( longer ). | |
| 22/10-92 | 8 |
New inlet guide in Dev rack. | |
| 22/10-92 | 9 |
Repl. Pumps mounted
with arrow against fluide flow. Rust free tray mounted under repl. Valves. |
|
| 01/12-92 | 10 |
New non return valves. | |
| 01/01-93 | 11 |
Guide forks on Fix and Water altered to black 913933. | |
| 01/02-93 | 12 |
Mounting of receiving basket altered. | |
| 01/02-93 | 13 |
Gas springs on cover altered. | |
| 15/03-93 | 14 |
Control panel altered to a rounder version. | |
| 20/04-93 | 15 |
Over flow pipes
altered . 2 soft rubber rollers in Dev inlet. |
|
| 14/05-93 | 16 |
Crossover guides altered to 217154. | |
| 10/06-93 | 17 |
Mother-board modified to give repl. only when inlet sensor activated & not when on-line interface PCB starts mc: | |
| 11/01-93 | 18 |
Ring type springs
(217334) in sted of type (65273) Not X-Ray. |
|
| 01/12-93 | 19 |
New temp. PCB 217097 | |
| 18/01-94 | 20 |
+ |
New IR PCB 911936 with tone decoder NE 567 |
| 22/04-94 | 21 |
Inlet guide in Dev altered. | |
| 19/08-94 | 22 |
Receiving basket
altered. Main switch box lowered. |
|
| 16/09-94 | 23 |
+ |
Dev inlet guide 430142 altered. |
| 10/11-94 | 24 |
No feed function altered to No feed light also on in on-line mode. | |
| 18/09-95 | 25 |
Asdjustabel receiving basket. | |
| 29/09-96 | 26 |
No need for extra grease for motor. | |
| 15/04-97 | 27 |
New speed PCB with creep speed. 911937 | |
| 16/06-97 | 28 |
Repl. Magneticvalves altered to Gormann Rupp pumps. New tanks. | |
| 30/03-98 | 29 |
New Fantech blowers with plastic wings in dry section. | |
| 04/05-98 | 30 |
Silicon hose mounted on heating elements. | |
| 28/07-98 | 31 |
Heating elements
911227 altered to 911230 . Hose altered to rubber. |
|
| 25/01-99 | 32 |
New repl/heat chassis. | |
| 12/03-99 | 33 |
Speed PCB with jumper to disengage creep speed. | |
| 2403-99 | 34 |
Heating elements altered to 911227 in rustfree steel. | |
| 26/03-99 | 35 |
Fram legs ( bottom )
altered from 12mm to 10 mm. New adjustment legs. |
|
| 18/06-99 | 36 |
+ |
Motor bracket 430092 reinforced |