| Modificationcard for: Heidelberg Signasetter/ Scangraphic Apollo conv/interf | Part No. : 454110 |
Print Date: 12-03-02
| Date | Lev. | + |
Description |
| 20/9-96 | 1 |
1st conv. | |
| 1/11-96 | 2 |
New version mk.2. 500N gassprings on conv. & 400N gassprings on lid |
|
| 15/11-96 | 3 |
New interface PCB. | |
| 24/4-97 | 5 |
+ |
Extra wealding on fastning plate. |
| 23/1-97 | 4 |
New lower
guide. Extra
gear wheel on gear belt. Magnet & buffer guide removed. |
|
| 24/4-97 | 6 |
Upper & lower inlet guide altered. | |
| 16/10-97 | 7 |
+ |
|
| 23/4-98 | 8 |
New interface PCB 454058 | |
| 14/8-98 | 9 |
Alterations to conv. lid. | |
| 16/11-98 | 10 |
+ |
New interface PCB 454059. |
| 16/11-98 | 11 |
+ |
New conv.lid. |
| 16/11-98 | 12 |
+ |
New support for gassprings under conv. bottom. |
| 16/11-98 | 13 |
+ |
New lower inlet guide 454223. |
| 22/1-99 |
14 |
Orignal print plate used with 454059 | |
| 28/1-99 | 15 |
New sensor angle 129964 | |
| 12/3-99 | 16 |
+ |
New interface PCB
454069. New conv. PCB 454609. |
| 8/4-99 | 17 | Lower guide altered. | |
| 14/4-99 | 18 |
+ |
Delay time altered |
| 5/5-99 | 19 |
+ |
Alterations on lower guide |
| 27/5-99 | 20 |
+ |
New software 1.01FF2. |
| 9/06-99 | 21 |
Conveyor motor
replaced with motor 70161 Not important as service issue |
|
| 25/11-99 | 22 |
+ |
Gasspring 454237
changed to 454227 in one side. New gasspring has safetylock mechanism. See servicebulletin |